- Thermocouples
-
Resistance thermometers
- with connection head
- Resistance thermometers with explosion proof
-
Special types
- RT with special fittings
- Room resistance thermometers
- RT with hand grip for penetration
- Combination RT (resistance and glass thermometers)
- Average value probe
- Small resistance thermometer for srewing in (compact thermometer)
- Sheathed resistance thermometer with connectorless wires
- Temperature probes with magnet for surface measurement
- Measuring inserts
- Precision resistance thermometer
- Cable sensors
- Cable sensors
-
Components and accessories
- Connection heads
- Thermo junction
- Connector
- Fixing materials
- Extension protecting tubes
- Calibration block
- Miniature fixed-point cell
- Reference junction
-
Transmitter
- Transmitter for TC, 4..20mA
- Transmitter for TC, 0..10V
- Transmitter for Pt100, Pt1000, 4..20mA
- Transmitter for Pt100, Pt1000, 0..10V
- Switching transmitter for Pt100, freely configurable
- Transmitter with LCD-Display
- Analog power supply for transmitters
- Transmitter for TC, DIN-Rail mounting, 4..20mA
- Transmitter for TC, DIN-Rail mounting, 0..10V
- Transmitter for Pt100, Pt1000, DIN-Rail mounting, 4..20mA
- Transmitter for Pt100, Pt1000, DIN-Rail mounting, 0..10V
- Digital thermometer
In-head switch transmitter LKM 105 for resistance thermometers Pt100 for mounting in connection heads form B
The LKM 105 is a free configurable transmitter for Pt100 measuring resistors according to DIN EN 60751. When a free selectable switching temperature is reached, a potential-free relay contact is switched. This contact can be configured as normally closed or normally open via a DIP switch. Another DIP - switch allows the change of the hysteresis. A small microcontroller prevents the relay from "chattering" even if the switching point is exceeded slowly, as is common with many temperature curves. By four further DIP - switches the measuring range is roughly selected. The fine adjustment of the switching point is carried out by means of an adjuster. The Type 105 can be ordered from the factory
with a customer-specific configuration. A change of the switching point is possible at any time. The Type 105 is suitable for mounting in the B-head and can thus be completed with a wide variety of sensors to form a temperature monitoring unit. Simple controlled systems can also be realized with it.
Sealing compound |
---|
Polyurethan, black |
Input |
---|
Pt100, 2 wire circuit |
Sensor fracture |
---|
like high temperature |
Accuracy |
---|
<1% FS |
Terminal type |
---|
screw terminal |
Weight |
---|
approx. 40g |
Shorted Sensor |
---|
like low temperature |
Permissible ripple |
---|
< 10 % |
Vibration |
---|
5g/10-200Hz |
Switching current |
---|
max. 5A |
Switching range |
---|
16 ranges between -200°C ... 480°C |
Contact rating |
---|
150W / 1250VA |
Switching voltage |
---|
30VDC, 250VAC |
TCR |
---|
< 50ppm/°C |
Operating temperature range |
---|
-25 °C ... +70 °C |
Clamping range |
---|
0.13...1.5mm² |
Humidity |
---|
< 95% |
EMC emission |
---|
EN 61000-6-3:2001 |
EMC interference rejection ratio |
---|
EN 61000-6-3:2001 |
Mounting |
---|
B-Head |
Supply voltage |
---|
21 ... 27 VDC / 15mA |
Dimension |
---|
44mm x 26,5mm (DxH) |
Switching precision |
---|
< 1 % |