- Thermocouples
-
Resistance thermometers
- with connection head
- Resistance thermometers with explosion proof
-
Special types
- RT with special fittings
- Room resistance thermometers
- RT with hand grip for penetration
- Combination RT (resistance and glass thermometers)
- Average value probe
- Small resistance thermometer for srewing in (compact thermometer)
- Sheathed resistance thermometer with connectorless wires
- Temperature probes with magnet for surface measurement
- Measuring inserts
- Precision resistance thermometer
- Cable sensors
- Cable sensors
-
Components and accessories
- Connection heads
- Thermo junction
- Connector
- Fixing materials
- Extension protecting tubes
- Calibration block
- Miniature fixed-point cell
- Reference junction
-
Transmitter
- Transmitter for TC, 4..20mA
- Transmitter for TC, 0..10V
- Transmitter for Pt100, Pt1000, 4..20mA
- Transmitter for Pt100, Pt1000, 0..10V
- Switching transmitter for Pt100, freely configurable
- Transmitter with LCD-Display
- Analog power supply for transmitters
- Transmitter for TC, DIN-Rail mounting, 4..20mA
- Transmitter for TC, DIN-Rail mounting, 0..10V
- Transmitter for Pt100, Pt1000, DIN-Rail mounting, 4..20mA
- Transmitter for Pt100, Pt1000, DIN-Rail mounting, 0..10V
- Digital thermometer
In-head transmitter LKM 143 for Pt100 / Pt1000 with output signal 4...20mA for mounting in connection heads form J
The LKM 143 is an analog measuring transmitter for Pt100 / Pt1000 measuring resistors according to DIN EN 60751. It converts the temperature-dependent resistance of the sensor into a current signal of 4...20mA in a highly accurate temperature-linear way. The LKM 143 can be calibrated to the range specified by the customer. The fine adjustment is done by a span and zero controller. Minor corrections on site are thus easily possible. The distance of the mounting holes is specified with 19mm.
* depends on sensor
Sealing compound |
|---|
|
Polyurethan, black |
Input |
|---|
|
Pt100/Pt1000, 2 wire circuit |
Output |
|---|
|
4...20mA current loop |
Test current |
|---|
|
0.8 ... 1mA* |
Sensor fracture |
|---|
|
>20 mA |
Reaction time |
|---|
|
< 0.1s |
Terminal type |
|---|
|
screw terminal |
Weight |
|---|
|
approx. 10g |
Range |
|---|
|
20 °C ... 850 °C* |
Zero point |
|---|
|
-200 °C ... +600 °C* |
Loop voltage |
|---|
|
10...35VDC, reverse protection |
Shorted Sensor |
|---|
|
< 4 mA |
Permissible ripple |
|---|
|
< 10 % |
Vibration |
|---|
|
5g/10-200Hz |
Linearity error |
|---|
|
<0.1% FS |
TCR |
|---|
|
< 100 ppm/°C |
Operating temperature range |
|---|
|
-25 °C ... +85 °C |
Clamping range |
|---|
|
0.13...0.75mm² |
Humidity |
|---|
|
< 95% |
EMC emission |
|---|
|
EN 61000-6-3:2001 |
EMC interference rejection ratio |
|---|
|
EN 61000-6-3:2001 |
Mounting |
|---|
|
J-head |
Dimension |
|---|
|
25 mm x 15 mm (DxH) |